New product information

CMN200 　CMN200 The vibration sensor which is smaller than a piece of rice
No-oriented vibration sensor

Developed product

※ The illustration is old specification.　※Click here for inquiry and sample

It can detect slight vibration from every direction quickly and is most suitable for automation of ON/OFF power supply of the hand held unit which assumed vibration as trigger. It is ultra small vibration sensor corresponding to reflow solder.

・Sensors almost not necessary electric power
・It is most suitable for battery power saving in no use such as portable device or the active tag.
・Size: It is ultra small with 2.2 x 2.2 x 1.4mm
・RoHS compatible

Internal structure	Electrode pattern	Example for use
		・ Hand held unit ・ Entrance and exit control active type IC tag ・ Electronic key with key less entry

Item		Standard
Operating characteristic	Operating sensitivity	More than 0.5G (note 1) (There is difference in sensitivity by direction to vibrate)
Out put form	Electric rating	DC1.5V～6V、1μA～100μA
Out put form	Contact resistance	Less than 100Ω
Basic specifications	Electrical life	More than 100 thousand times(Term; over DC3V、3μA load resistance)
	Durability	more than 1 million times
	Using temperature range	-25～70℃(Should be no freezing and condensation)
	Storage temperature range	-25～70℃(Should be no freezing and condensation)

(note 1) Performance sensitivity with horizontally 10Hz vibration. It may change without notice for improvement.
Please ask us if you consider to introduce.

CMN200-K 　Information of the sensor for evaluation with board
Omnidirectiona vibration sensor

Developed product

■Printed circuit board specifications

You do not have to produce experimental board and soldering, it is very convenient to evaluate tip type vibration sensor. Necessary input terminal has been done. You can just connect to the drive circuits and can obtain output immediately.

・ Board size 10.0mm
・ Terminal shape φ 0.8mm
・ Pitch between the terminal 2.5mm
・ Terminal function Direct connect

■Reference connection diagram

Notice
・ Please assume trigger of ON/OFF having chattering or not.
・ Please be careful especially about inrush currents in the chattering cancellation circuitry.
・ Do not use and attach to the equipment in the environment that is easy to be affected by supersonic wave, static electricity, magnetic force.
・ Please do not use in the cases that might give harm to human body by trouble and malfunction.
・ Please ask us about detail.

←Previous page

[ Tilt vibration sensor TOP ]

▲Top of this page